Trebs 21137 Mode D'emploi page 10

Parts Guide
A. Plunger
B. Feeding chute
C. Lid
D. Filter
E. Juice Collector
F. Driving Shaft (do not remove)
G. Motor Unit
H. Spout
I. Control Knob
J. Clamps
K. Pulp Container
PREPARING FOR USE
1. Ensure your glass or pitcher sits under the
spout to collect the juice.
2. Place the pulp container into the appliance by
tilting it forwards slightly. Insert the top end
first and then push down the bottom end.
3. Place the juice collector into the appliance. Make sure the rim is flush with the motor unit.
4. Put the filter in the juice collector. Ensure the filter is fitted securely onto the driving shaft.
The blade should sit below the rim of the pulp container when in place.
5. Hold the lid over the filter and lower it into position.
9