Network Configuration - Bodet HARMONYS LINE Notice D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.2 Network configuration
This page can be used to configure the device on the network as follows:
- MAC address: this is the MAC address of the device. This address is unique to each product. This number is
indicated on a label on the rear of Bodet devices.
- Name: product name + MAC address (by default). It is advisable to include the position of the device in the name of
the product. Example: Line_Home
- Box to tick DHCP: enables automatic definition of the IP settings of the product on the network (where a DHCP server
is present on the network).
If this is not ticked, the following settings are modifiable:
- IP Address: allows manual definition of the product's IP address.
- Mask: the subnet mask can be used to associate a device with the local network.
- Gateway: the gateway can be used to connect the device to two computer networks.
- DNS address: address which can be used to associate a product name with an IP address. This eliminates the need
to enter an IP address into the browser, as it can be replaced with a number or name defined by the
user, Example: www.bodet.com being easier to remember than 172.17.10.88.
The OK and Restart button can be used to save data changes in the device concerned, and then restart it.
6
EN

Publicité

Table des Matières
loading

Table des Matières