Publicité
Page 1 Façade
Assemble the ridge plate with the bulges pointing downward, in the bolt slots.
Page 2 Façade
Assemble two traction strips in the façade with traction strips. (page 1 detail 2).
Page 3 Stop Bolts
During the entire assembly !10! stop bolts are placed!!!
Page 4 Sidewall + stop bolts
During the entire assembly !2! stop bolts are placed, for greenhouses with less than 7 windows (detail 1 and 6). For greenhouses with 10 windows in the sidewall, there is !1!
extra stop bolt placed (detail 5). You assemble 2 sidewalls.
Page 5 Assembly
You now have 2 façades and 2 sidewalls.
Slide the panels one into the other until the end, the stop bolts are immediately tightened firmly and definitively.
Page 6 Roof
-
First install the ridge (profile C) on top of the 2 façades and fix it definitively with the stop bolts.
-
Greenhouses that are 7 & 8 windows long are provided with 2 glass rods (profile A) of each 2 stop bolts.
-
Place the glass rods (profiles A) between the sidewall and the ridge you just put in place (profile C) .
-
Assemble the traction strips (profiles B) to the ridge (profile C) in the corner and subsequently together with the glass rod (profile A) at the sidewall.
V
Publicité
