Numan ONE Mode D'emploi page 56

NETWORK
The radio is compatible with all common network protocols and encryption methods.
To connect the radio to your network, you need a Wi-Fi wireless router, together with
password key if set. Select
select a network from the list. If the network is open (non-encrypted), the radio connects
without any further ado.
If your network is standard encrypted enter the network's key (password), use the Select
control to move the cursor through the characters and select. As each character is selec-
ted, the key is built up near the top of the display. There are three options accessible by
turning Select back before the first characters (0123...) - Backspace, OK and Cancel.
WPS encrypted networks are identified by '[WPS]' at the start of the network name, and
have three methods of connection. Select one and follow the prompts:
• Push Button:
scans for a ready Push Button Connect network and connects.
• Pin: The radio generates an 8-digit code number which you enter into the wireless
router, Access point, or an external registrar (e.g. advanced versions of Windows Vista).
• Skip WPS:
on setting up a WPS encrypted network, see your WPS router's instructions.
WLAN region/country > Wi-Fi network
The radio prompts you to press the connect button on the router. It then
Enter key as for a standard encrypted network, above.For more information
56
(SSID), and then