Changing Channels - Samsung LN-S2651D Mode D'emploi

If you want to reset this feature...

Changing Channels

Using the Channel Buttons
Using the PRE-CH Button to select the Previous Channel
6. Press the ENTER
Press the or buttons to select "Yes" or "No", then the ENTER
"Select the time zone in which you live" menu is automatically displayed.
7. Press the or buttons to highlight the time zone for your local area (and to
move the highlight to the appropriate time zone on the map of the United States).
Press the ENTER
be set automatically.
If not, see page 40 to set the clock.
8. The message "Enjoy your watching." is displayed.
When you have finished,press the ENTER
1. Press the MENU button.
Press the or buttons to select "Setup", then press the ENTER
2. Press the or buttons to select "Plug & Play".
Press the ENTER
For further details on setting up options, refer to the previous page.
Plug & Play can only be accessed in the TV mode.
1. Press the CH or CH
When you press the
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 16 to memorize channels.
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
English-14
button.
button. If you have received a digital signal, the time will
button.
button.
button to change channels.
CH or CH
button, the TV changes channels in sequence.
button.
button.