Diagnostic/Error Messages - Illinois Tool Works Stero SU-L Mode D'emploi Et D'installation

18 |
STERO UNDERCOUNTER DISHWASHER & GLASSWASHER
OPERATION
DIAGNOSTIC /ERROR MESSAGES
Error
Door Open
Low Rinse
Temperature
Low Rinse
Temperature
(10 In A Row)
Wash
Thermistor
Error
Booster
Thermistor Error
Final Rinse
Thermistor
Error
Low Water In
Booster (Time
Out Within
Any Cycle)
Drain Error
Sump Level Error
Booster Level
Error
(continued)
Display
Door Open
LOW RINSE TEMP
LOW RINSE TEMP
Check Water Input
WASH TEMP SENSOR
Service Required
(Service Phone Number)
OPEN or SHORT
BOOSTER TEMP SENSOR
Service Required
(Service Phone Number)
OPEN or SHORT
RINSE TEMP SENSOR
Service Required
(Service Phone Number)
OPEN or SHORT
FILL ERROR
Service Required
(Service Phone Number)
DRAIN ERROR
Service Required
(Service Phone Number)
SUMP LEVEL SENSOR
Service Required
(Service Phone Number)
OPEN or SHORT
BOOSTER LEVEL SENSOR
Service Required
(Service Phone Number)
OPEN or SHORT
Description
Displayed when the door of the machine is
opened.
After two consecutive low temperatures,
if problem occurs on the third consecutive
cycle, the error will display. The machine
will continue to run cycles.
If the Low Rinse Temperature error occurs
for 10 consecutive cycles, the error will
change. The machine will continue to run
cycles.
Error displayed if wash temperature probe
is out of range. The machine will continue
to run cycles.
Error displayed if booster temperature
probe is out of range. The machine will
continue to run cycles. (SU-H model only.)
Error displayed if final rinse temperature
probe is out of range. The machine will
continue to run cycles.
Error displayed if the unit times out before
the unit is completely filled. The machine
will not operate and will only allow power
down.
Error displayed if the water level in the
unit will not come up. The machine will not
operate and will only allow power down.
Error displayed if sump pressure switch is
out of range. The machine will not operate
and will only allow power down.
Error displayed if booster pressure switch is
out of range. The machine will not operate
and will only allow power down.