Installation - Fresh Ventilation INTELLIVENT Manuel

INSTALLATION GUIDE »
1. Contents
The packaging should contain the following:
• Fan
• 2 adapters, 1 x Ø98 mm and 1 x Ø118 mm
• Guide
• Accessory bag with 4 screws and plugs, a pull
cord with toggle, and an insulating sleeve for
the standard cable type (FK)

2. Installation

The fan must not be installed in an environment
where the temperature
can exceed 50 °C.
If required, attach a
suitable adapter to the
fan's chassis, Ø98 (1)
for a Ø100 duct or
Ø118 (2)
for a Ø125 duct.
The fan can also be installed and used without an
adapter, full surface-mounted installation, e.g. with
ducts less than Ø98.
When installing the fan, check that there is a seal
between the pipe/duct and wall/ceiling to prevent
humid air from penetrating the wall or ceiling. Use
the accompanying screw and plug, if necessary.
Mounting dimensions
6
45
Min 120
1
2
45
Ø100 alt. Ø120