Safety Regulations And Notes; Hazard Warning Levels; Warranty And Liability; Personnel Qualifications - DENIA DC-100 Instructions D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installation and safety instructions
for AC/DC built-in devices
The device type and date of manufacture (week/year) can be found on the device
rating plate. In the event of any queries about the device, please quote all the
details given on the rating plate.
For further information please visit:
www.ebmpapst.com
ebm-papst Landshut GmbH
Hofmark-Aich-Str. 25
84030 Landshut, Germany
Phone +49 871 707-0
Fax +49 871 707-465
Info3@de.ebmpapst.com
www.ebmpapst.com
As at: 24 July 2013
Version: 1
CONTENTS
1.
1.1.
1.2.
1.3.
1.4.
1.5.
1.6.
1.7.
1.8.
1.9.
1.10.
1.11.
1.12.
1.13.
2.
2.1.
2.2.
3.
3.1.
3.2.
3.3.
3.3.1.
3.3.2.
3.4.
3.5.
3.6.
4.
ebm-papst Landshut GmbH ● Hofmark-Aich-Str. 25 ● 84030 Landshut, Germany ● Phone +49 871 707-0 ● Fax +49 871 707-465 ● info3@de.ebmpapst.com ● www.ebmpapst.com

1. SAFETY REGULATIONS AND NOTES

These instructions must always be made available before working on or with the
product, prior to installation and start-up, before performing any maintenance and
servicing work and prior to any other usage. Keep the instructions in a safe place
for later reference and for any subsequent owners.
Always study these operating instructions carefully before working on or with the
product. Observe the following notes and warnings to avoid all risk of injury, dam-
age and malfunctioning and act accordingly.
The product documentation is to be regarded as part of the device. The device is
only to be sold or passed on together with this documentation.
This product documentation can and should be duplicated and handed over as a
source of information on risks and hazard avoidance.
1.1.

Hazard warning levels

In this product documentation use is made of the following hazard levels to indicate
potentially hazardous situations and important safety regulations:
DANGER
1
Indicates an imminent hazardous situation which, if the appropri-
1
ate action is not taken, will result in serious and even fatal injury.
The measures must be strictly observed.
1
WARNING
1
Indicates a potentially hazardous situation which, if the appropri-
2
ate action is not taken, could result in serious and even fatal
injury. Exercise extreme caution while working.
2
CAUTION
2
Indicates a potentially hazardous situation which, if the appropri-
2
ate action is not taken, could result in slight or minor injury or
damage to property.
2
NOTE
2
A potentially harmful situation can occur and, if not avoided, can
lead to property damage.
2
2
1.2.

Warranty and liability

2
Warranty and liability claims in the event of injury and property damage will not be
accepted if these can be attributed to one or more of the following causes:
3
- Improper use of the device
- Inexpert installation, start-up, operation and servicing of the device
3
- Operation of the device with defective safety equipment or with safety
mechanisms and guards not correctly fitted or not in proper working order
- Non-observance of the safety and installation instructions
- Unauthorised structural modifications to the device
3
- Inexpert repair work
- Force majeure
3
- Damage arising from continued usage although a fault has occurred
- The conveying of unsuitable media
3
- Defects in supply lines
4
1.3.

Personnel qualifications

4
4
The product is only to be transported, unpacked, operated, serviced or put to any
other form of use by appropriately qualified, trained and instructed specialist per-
4
sonnel (exclusively by a qualified electrician where applicable).
4
4
Page 1/5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Stoves df-80

Table des Matières