Explanation Of Key / Knob Control Functions - Grafco GF-TX5 Manuel D'utilisation

EXPLANATION OF KEY / KNOB CONTROL FUNCTIONS

DOWN Key This key decreases the setting
when in Pulse Width Mode or
Pulse Rate Mode. *
*Decrease by pressing the DOWN key: The width can be adjusted by 10uS/step.
The rate can be adjusted in 1-20Hz by 1Hz/step, 20Hz-150Hz by 5Hz/step.
MODE Key
This key selects Timer Mode,
Stimulation Mode,
Alternate Mode,
Pulse Width Mode (uS) or
Pulse Rate Mode (Hz).
SET Key This key switches between
the different settings in the
Timer Mode, Stimulation Mode,
and Alternate Mode treatment
parameters.
UP Key This key increases the setting
when in Pulse Width Mode or
Pulse Rate Mode. *
*Increase by pressing the UP key: The width can be adjusted by 10uS/step.
The rate can be adjusted in 1-20Hz by 1Hz/step, 20Hz-150Hz by 5Hz/step.
Ch1 / Ch2 Channel 1 and Channel 2
Knobs Intensity Control Knobs
This key regulates the number of pulse width or
pulse rate of the individual current pulses.
This key changes the treatment parameter.
Each time the MODE key is pressed, the next
parameter will display. The selected treatment
parameter in the current mode will flash.
Each time the SET key is pressed, the
parameter will change to the next setting. The
selected mode setting will flash. When the
desired parameter is flashing, press the MODE
key to switch to the next treatment parameter.
The parameter just set will be displayed and
will no longer flash.
This key regulates the number of pulse width or
pulse rate of the individual current pulses.
These knobs control the strength of the
stimulation and also function as ON / OFF
controls.
7