eSATAII Connectors
(eSATAII_TOP: see p.2, No. 39)
(eSATAII_BOTTOM: see p.2, No. 3)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.2 No. 22)
(9-pin USB6_7)
(see p.2 No. 21)
WiFi Header
(11-pin WIFI)
(see p.2 No. 29)
ASRock X38TurboTwins-WiFi / X38TurboTwins Motherboard
These eSATAII connectors
support SATA data cables for
external SATAII function. The
eSATAII_TOP
current eSATAII interface
allows up to 3.0 Gb/s data
transfer rate.
eSATAII_BOTTOM
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_5 (Port4)
or SATAII_6 (Port5) connector and
eSATAII connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to
power cable to the power
the power
supply
connector of the power supply.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports WiFi+AP
function with ASRock
WiFi-802.11g or WiFi-802.11n
module, an easy-to-use wireless
local area network (WLAN)
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
2 1
2 1
2 1
2 1
2 1