SOUNDMASTER PDB1550 Mode D'emploi page 28

Before use
1. Insert a USB stick into the USB socket on the back side of the device.
2. Press the „MENU" button and select „USB".
3. Select with the
Note: Under the item "Recording device" you will find information about the connected USB
stick.
4. Select „Format" and press the „OK" button. In the following menu, select the format and
start the process under the item "Format" by pressing the "OK" button.
Start a recording
1. Set the desired TV station on the unit.
2. Press on the remote control the „REC" button. The recording starts and the display shows a
flashing point.
3. To stop the recording, press on the remote control the „
button.
Watch a recording
1. Press the „MENU" button and select the point „USB".
2. Select with the
3. Mark the item "PVR" and press the "OK" button again. Under the point "HBPVR" you will
find all recorded programs.
4. Use the button to select the desired program and press the "OK" key.
starts on the right side of the screen. To see the picture in full screen, press the RED button.
Timeshift
This function requires a connected USB stick on the back of the device!
1. While a TV program is playing, press the "
device pauses and continues recording the current program to USB.
2. To continue watching the program press the "
press the " STOP" button. The current program can now be seen again.
PROGRAM MANAGE SETTINGS
1. To access the menu, press the „MENU" button and select „Program". Here are options for
changing channel management settings.
2. Select an option and press "OK" or
3. Press the „EXIT" button to exit the menu.
buttons the point „PVR Configuration" and press the „OK" button.
button the point „Multimedia" and press „OK" for confirmation.
to adjust that setting.
PDB1550 / English Instruction Manual
STOP" button and after the "OK"
PAUSE" button on the remote control. The
PAUSE" button again. To end the process,
8
layback
The p