Content Of Delivery; Battery Installation; Basic Operation - SOUNDMASTER PDB1550 Mode D'emploi

➢ Main unit
➢ AC adapter
➢ 2 Game controller
➢ Telescopic antenna
1. Remove the battery compartment cover on the back of the remote control.
2. Insert two AAA batteries with the correct polarity into the battery compartment (see
illustration in the battery compartment).
3. Close the battery cover again.
Make sure that the mains voltage corresponds to that on the rating label. Then connect the AC
adapter to the right side of the device and to an electrical outlet. The charging indicator on the
device lights up:
LED red: The accu is charging.
LED green: Accu is fully loaded
Switch on the device with the ON / OFF switch on the right side.
ERP power management
The device automatically switches to standby after 30 minutes if no playback takes place.
To turn the device back on, turn the power off and on again.
SWITCH ON/OFF
Press the button "
power indicator light red.
Press the button „
indicator light green.
SOURCE SELECTION
In on mode, press repeatedly the "MODE" button on the remote control or on the unit to select
the function.
VOLUME ADJUSTMENT
Press the "VOL –" or "VOL +" button on the remote control or on the unit to increase or
decrease the volume.
MUTE
Press the „MUTE" button on the remote control or on the unit to switch off the volume.
Press the „MUTE" button again to switch on the volume.

CONTENT OF DELIVERY

BATTERY INSTALLATION

INSTALLATION

BASIC OPERATION

Standby/On" on the remote control to switch off the unit in standby. The
Standby/On" again on the remote control to switch on the unit. The power
PDB1550 / English Instruction Manual
➢
Remote control
➢
12V adapter
➢
Audio-/Video cable
➢
Instruction manual
3