ENERGY SISTEM 65 Série Manuel De L'utilisateur page 49

TV OUT MODE
≥
To enjoy your Energy™ 65 Series player in your TV you just have to connect it using the
provided TV-OUT cable. Plug in the RCA audio connectors (red and white colors) and video
(yellow color) to the AV input of your TV, and plug in the other side to the TV-OUT output
connector located in your MP5 player (the connector is the same than the one used to
connect the earphones).
Note
: For a correct visualization, depending on the display format of your TV, you should
choose in your player the NTSC or PAL mode, from the menu Digital TV > Configuration > TV
> Display Mode. We recommend you to keep the NTSC mode selected by default, and change
to PAL mode only if you connect the MP5 player to your TV, in case it is not compatible with
the NTSC mode.
ENERGY MOVIER: INSTALLATION
≥
With the Energy Movier software tool you can easily convert your AVI / WMV / MPG / VOB /
ASF videos to the AVI format (XVID with MP2 audio) so they need less memory space and to
ensure compatibility with the majority of formats/codecs.
To install Energy Movier follow these steps
1.
Insert the software CD in your CD/DVD reader unit of your PC.
Note
: In the software CD you can find the latest version of the program at the time when the
unit leaves the factory. However, if you have an Internet connection, we recommend you to
always download the latest version from our website www.energysistem.com.
2.
Once you see the Energy Sistem menu, select "Install Energy Movier". If you have autorun
disabled, you can run the installation file "setup.exe" from the folder "Energy Movier".
49