Renkforce 1396949 Mode D'emploi page 2

Operating instructions
Bluetooth Android & iOS remote control
®
Item no. 1396949 Black
Item no. 1396950 White
Intended use
The product is intended to remotely control your iOS or Android device when taking photos or
videos. Power is supplied by a button cell battery. The product is suitable for use in dry areas only.
Protect the product from moisture and humidity.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Remote control
• Key ring
• Battery (type CR2032)
• Operating instructions
Up-to-date Operating Instructions:
1. Open produktinfo.conrad.com in a browser or scan the displayed
QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying around,
as there is risk that children or pets swallow them.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge
non-rechargeable batteries. There is a risk of explosion!
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
• There is an eyelet located at the bottom side next to the battery compartment. You
may use this eyelet to attach the included key ring.
• The remote control is compatible with iOS and Android devices, without installing
any software.
a) Installing the battery
• Rotate to open the battery compartment cover.
• Put the supplied button-cell battery in the battery compartment with the positive (+) side facing
upwards.
• Replace the cover and secure it.
Replace the battery when the remote control is not working.
b) Paring
• Slide the power switch on the upper right side to the ON position to turn on the
remote control. The camera button flashes. Your remote control searches for
Bluetooth -enabled devices.
®
• Follow the instructions for your Bluetooth
Select "Photoshot" when it appears in the available device list. After successful pairing, the
camera button stops flashing and the remote control enters standby mode.
c) Using the remote control
• Press the camera button to take a photo or video.
• If connected with an Android device, press - button to zoom out and press + button to zoom in.
Zoom function only works with Android devices.
• Slide the power switch to the OFF position to turn off the device after use.
Maintenance and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Never submerge the product in water. To clean the product, a dry, soft and clean cloth is
sufficient.
• Do not apply too much pressure to the housing to prevent scratching.
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this
product conforms to the fundamental requirements and the other relevant regulations of the
directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Remove any inserted battery and dispose of it separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon on
the left).
Used batteries can be returned to collection points in your municipality, our stores or
wherever batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................................1 × 3 V/DC button cell, type CR2032
Bluetooth version .......................................3.0
®
Range .............................................................max. 10 m
System requirements ..................................iOS 5.0 or above; Android 2.36 or above
Operating/storage conditions ....................-20 to +55 ºC, 10 – 90 % RH
Dimensions (L x W x H) ...............................66 × 33 × 9 mm
Weight ............................................................12 g (without battery)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
-enabled device to pair with the remote control.
®
V1_1215_02-ETS-Mkd