Focal ALPHA 50 EVO Manuel D'utilisation page 22

ALPHA
™
U s e r m a n u a l
System
• Frequency response
(+/- 3dB)
• Maximum SPL
Electronic section
• Inputs
- Type / Impedance
- Connectors
• Medium and low
frequency amplifier
• High frequency
amplifier
• Automatic stand-by
mode
- Stand-by
- Stand-by disabled
• Power supply
- Voltages
THE VOLTAGE
CANNOT
BE MODIFIED
- Connection
• Settings
- Sensitivity
- Level midrange/
bass (0-250Hz)
- Treble level
(4.5-35kHz)
- Power on/off
• Stand-by
consumption
• Views and controls
Transducers
• Woofer
• Tweeter
Cabinet
• Construction
• Finish
• Dimensions with 4
rubber feet (HxWxD)
• Weight
EVO
ALPHA 50 EVO ALPHA 65 EVO
45Hz - 22kHz 40Hz - 22kHz
101dB SPL 104dB SPL
(peak @ 1m) (peak @ 1m)
TRS: symmetrical 10kOhms
XLR: symmetrical 10kOhms
RCA: asymmetrical 10kOhms with compensated sensitivity
35W 55W
25W 30W
After around 15 minutes of no use
By signal detection >6mV
100-240V~ (T2AL fuse/250V)
IEC socket and detachable power cable
Adjustable, 0 or +6dB
Adjustable, +/-6dB
Adjustable, +/-3dB
On/off switch on the rear panel
<0.5W
On and off LED - Stand-by LED
5" (13cm) 6.5" (16.5cm)
Slatefiber cone Slatefiber cone
25mm (1") with aluminium inverted dome
0.6" (15mm) MDF
Black vinyl and paint
12.2x9x9.41" 13.35x10.28x11.38"
(310x228x239mm) (339x261x289mm)
13.1lbs (5.95kg) 16.8lbs (7.6kg)
ALPHA 80 EVO ALPHA TWIN EVO
38Hz - 22kHz 38Hz - 22kHz
106dB SPL 108dB SPL
(peak @ 1m) (peak @ 1m)
80W 50W
50W
35W 30W
8" (20cm) 6.5" (16.5cm)
Slatefiber cone Slatefiber cone
15.35x11.65x13'' 10.24x21.65x11.41''
(390x296x330mm) (260x550x290mm)
21.6lbs (9.8kg) 26.9lbs (12.2kg)
22