Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.1
Float adjustment
8
Fig. 3: Float adjustment
The float line is fitted with three weights. Two of the weights are
fixed, one (1) at the end of the line and one (2) 15 cm above the end.
An adjustable weight (3), which is used to fix the float in position, ist
fitted between the two fixed weights.
For tanks without manoles or flanged nozzles:
Push the float up to weight 2 and press weight 3 tight. The float is
then fixed in position.
For tanks with manholes or flanged nozzles: The distance by which
the manhole or flan-ged nozzle projects above the tank must be tak-
en into consideration with reference to the length of the line.
Measure this distance from weight 2 in the direction of weight 1 and
mark it on the line. Push the float up to this mark and fix it in position
using weight 3.
– English –
Unimes
Publicité
Table des Matières
