Dantherm HPP-i Série Manuel D'installation page 202

MANUALE D'USO/INSTALLAZIONE
Create Family
Please set family name and choose the room of device.
c. Creare una famiglia
APP Pairing
Please make sure you are connected to the Wi-Fi.
1.Press " " for 3 seconds to unlock the screen, press "
then release, a�er hearing the "Beep",enter Wi-Fi code. During connec�on,
" " flashes. When the APP connects to the Wi-Fi successfully, the "
d. Accoppiamento dell'applicazione
light will come on.
26
3
Create Family
Add Family
Enter Family name
Please set family name and choose the room of device.
Set location
You can change room seettings anytime.
4
APP Pairing
Please make sure you are connected to the Wi-Fi.
1.Press " " for 3 seconds to unlock the screen, press "
then release, a�er hearing the "Beep",enter Wi-Fi code. During connec�on,
" " flashes. When the APP connects to the Wi-Fi successfully, the "
light will come on.
Add Family
Enter Family name
Set location
You can change room seettings anytime.
" for 3 seconds
"
Assicurarsi di essere connessi al Wi-Fi.
1. Premere " " per tre secondi per sbloccare
lo schermo.
2. Premere " " per tre secondi, quindi rilasciare; dopo
l'emissione del segnale acustico, inserire il codice Wi-Fi.
Durante il collegamento, la spia "
l'applicazione si collega correttamente al Wi-Fi, la spia
" " si accende.
" for 3 seconds
"
" lampeggia. Quando
1007332 EDIZIONE 5