Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
PRE-INSTALL
INSTALL
NETWORK
ACCESS CONTROL
Postal Lock
1. Remove the wing nut and plug. Discard the wing nut and plug.
2. Remove 4 mounting nuts from studs.
3. Install postal lock using 4 nuts from step 2.
4. Cut the factory installed wire tie from the postal lock switch.
The postal lock switch is wired from the factory.
Wing Nut and Plug
Postal Lock
22
Publicité
Chapitres
Table des Matières
