First Use; How To Use The Device - MASCOT MOL-CE-HT01-S Mode D'emploi

3. INSTALLING AND USING THE DEVICE
A
B

FIRST USE

Open the packaging carefully before taking out the device. Make sure the device is complete and
undamaged. If any components are missing or damaged, contact the vendor and do not use the product.
Retain the packaging or recycle it in accordance with local regulations.
• Remove all packaging from the device.
• Clean the device. Please refer to the 'cleaning and maintenance' section.
• Collapse the side wings
• Check the device power switch
• Connect the power plug

HOW TO USE THE DEVICE

The device is suitable for drying i.e. blankets, laundry & shoes on the collapsible wing.
• The device has a sensor that detect if it is upright position. In case the device is not in upright position it will
switch OFF automatically.
• A maximum load capacity of 5 kg can be placed on the middle section
• A maximum capacity of 2 kg can be placed on the collapsible wings (1 kg each)
• The device automatically shuts down preventing it from overheating.
• D uring operation you can switch OFF the device at any time with the ON/OFF power switch
NOTE!
• The device only operates in upright position.
• Do not move or store the device until it has cooled down.
• Do not insert or allow any foreign objects to enter into the ventilation or exhaust opening as this may
cause an electric shock, fire or damage the device.
Move sliding rod
is switched to the "0" position (OFF)
A
to the power socket.
B
Stretching direction
EN-4
.
A