Settings; Using Menu Options - Atag CM4511AC Mode D'emploi

SETTINGS

Using menu options

5 7 9
EN 20
You can change the following menu options and functions:
• Rinsing
• Set language
• Energy saving (enable or disable energie saving)
• Set time (daytime)
• Auto start (auto switch on)
• Auto off (auto turn off)
• Set temperature (of the water to make coffee)
• Water hardness
• Contrast (display)
• Buzzer
• Statistics (from the appliance)
• Default values (reset)
• Descaling
To go back to the coffee mode, press the 'Return' touch key (11).
11
Rinsing
If 2/3 minutes have passed, since you last made coffee, you should
first rinse the system to preheat the brewing unit. Select the rinsing
function from the appropriate menu. Let the water run into the drip tray
underneath. You can also use this water to warm up the cup that you
are using for the coffee. In this case simply let the hot water run into the
cup (and then empty it).
1. Press the touch key 'MENU' (10) to enter the menu.
2. Press the 'Scroll' touch keys (7 and 9) until "RINSING" is displayed.
3. Press the touch key 'OK' (5) to confirm. 'RINSING PRESS OK' is
displayed. Press the touch key 'OK' (5) again to confirm
10
4. The appliance performs an automatic rinse cycle (a little hot water
runs out of the spouts and is collected in the drip tray beneath).