Publicité
Les langues disponibles
Les langues disponibles
Connecting diagram for models 5511-65
ON
1
2
3
4
1 2 3 4 5 6 7 8
Elektric security bolt
5511-65
illustration 3: Connecting diagram for electric security bolt
Terminal assignment:
1-10 terminals for electric security bolt.
S 5 Possibility to connect a switch or a timer, e. g. for time-related permanent
unlocking. If S5 is closed the door is permanently unlocked. Locking is not effected
by opening or closing the door.
If S5 is open the door can be momentarily unlocked by operating push button S7.
The door is automatically locked after closing the door.
Triggering must be effected by means of potential-free contacts.
S 6 Attention: Indispensable!
A door contact which must be installed in the door frame (cone contact):
This contact is used for monitoring the state of the door (open/closed). Throwing of
the bolt and consequently locking is only possible when the door is closed
(S6 closed).
S 7 Push button for manual momentary unlocking:
Triggering must be effected by means of a potential-free contact.
‘
Possibility to connect an external monitoring display system:
Terminal 17 conducts 12 V when the door is closed, terminal 18 conducts 12 V
when the door is open. The maximum capacity of the outputs is 100 mA.
’
Possibility to connect a power supply unit (terminals 19 and 20):
The voltage range to be supplied by the power supply unit is 12-16 V AC/DC and
the unit must provide a capacity of 1.5 A. We recommend model 1001-121.
“
Possibility to connect power supply unit (terminals 21 and 22):
The power supply unit must supply 12 V stabilized DC and provide a capacity of
1.5 A. Positive pole to terminal 21, negative pole to terminal 22.
’ and “
To
Instructions on wiring and installation must be observed precisecly! Otherwise guarantee will become invalid.
Control Device for Motorized Power bolts 5512-13
9
10
S5
: Only one power supply unit must be connected!
11
12
13 14
15 16
S7
S6
17 18
19 20
21 22
rt
gn
power supply
D00213-A0000401
Publicité
