Cleaning And Maintenance - Teesa TSA3506 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

7. Unplug the device from power supply mains.

Notes on usage:

• Don't use the appliance when not immersed into food.

• Short-time operating: Use the appliance for no longer than 1 minute at a time; after that

let the device cool down for at least 1 minute. Please regard 1 minute of operation and

1 minute of rest as a one operation cycle. After continuous operating the device of 5

cycles (that is 1 min. operation followed by 1 minute rest, 5 times in a row), the blender

must be left for cooling for about 30 minutes.

• Don't operate hard food for longer than 10 seconds at once.

• Do not use the appliance for dry grinding hard food like soybean, rice and frozen meat,

ice cubes, nutmeg, coffee beans, grains etc., nor for succulent liquid food processing.

Don't operate food without water!

• Food preparation before processing with the blender: cut the food into cubic blocks no

bigger than 1,5x1,5 cm, and add some liquid (e.g. water, milk, etc.).

• Don't place the device into hot ingredients. Hot ingredients should be cooled down prior

to processing by this appliance. (Max. ingredient temperature is 60°C).

• Always disconnect the device from mains supply before cleaning or storing.

• Motor unit should be cleaned only with soft, slightly damp cloth. Never immerse motor

unit into water or any other liquid.

• After processing very salty food, it is suggested to rise the blades right away.

• Wash the blending stick in a warm, soapy water. Rinse well.

• The blending stick can be cleaned in a dishwasher (only if the set temperature is below

50ºC). When cleaning in a dishwasher, be careful not to overdose cleaner or decalcifier.

When processing food with color, the plastic parts of the appliance may discolor. Wipe

these parts with vegetable oil before placing them in the dishwasher.

• Cleaning should be performed immediately after use.

• The blade is very sharp – exercise caution when handling the blade!

• Let the device dry completely before assembling or storing.

Problem

The motor running,

but the blade

doesn't work