Before You Begin - Devon&Devon Newsletter Mode D'emploi

Thank you for choosing a Devon&Devon product.
Please read this manual before installing the product.

BEFORE YOU BEGIN

The towel warmer must be installed by a qualified technician.
Check that the towel warmer is compatible with the heating
system.
Installation is the ultimate responsibility of the installer.
Verify the presence of all items inside the package using the
Packing List included in the following page.
Also verify that none of the components show visible defects.
Care should be taken to avoid damage when installing or
servicing the towel rails by ensuring tools do not come into
direct contact with the product service.
If you should notice any defects please contact Devon&Devon
immediately.
Devon&Devon retains the right to modify the product for technical
or production reasons. We will not be held responsible for any
inconveniences caused by the above-mentioned changes.
IMPLEMENTS REQUIRED
A: Measuring tape
B: Allen wrench (2mm)
C: Pencil
D: Drill + Wall bit
E: Level
F: Flat-tip screwdriver
(
not supplied by devon
A
C
B
11
& )
devon
F
E
E
N
G
D