Composite Video Output; Colour System - Promax GV-198 Mode D'emploi

[10] Keyboard chart
[11]
VIDEO

Composite video output

Set-up numeric display
The chart generator GV-198 allows to set a large variety of parameters, through
the keyboard and the rotary selector. In order to be able to select the most habitual
configurations with no need to modify the parameters individually, the equipment offers
the possibility of storing in memory up to 10 configurations [1 to 10].
The display movement is done turning the rotary selector [8] the location is
indicated by means of an emphasised script underneath of each selection. In order to
change the selected value the rotary selector [8] must be pressed once and when is
selected the digit blinks. When turning the rotary selector in this position, the selection
changes based on the possibilities available. In order to quit the selection the rotary
selector must be pressed again.
[12] MEMORY
It indicates the position of active memory. When turning on, it appears in the
position 1. In the memory all the values that appear in display, in the chart
selection and the other function keys of the panel are stored. In order to modify
the content of a memory, it will have to enter this field, select the wished memory
number and to keep pressed the rotary selector until the configuration beep is
heard.
[13] TELEVISION SYSTEM
Selection of the television system B / G, I, D / K, L, M or N.
[14]

COLOUR SYSTEM

Selection of the colour system between the PAL, NTSC or SECAM.
Page 12
Figure 3.- Set-up numeric display
TV generator GV-198
01/2004