Storage, Disposal - WIKA WU-20 Mode D'emploi

10. Trouble shooting / 11. Storage, disposal
If the problem persists, contact our sales department.
USA, Canada: If the problem continues, contact WIKA or an authorized agent for assistance. If the pressure
transducer must be returned obtain an RMA (return material authorization) number and shipping instructions
from the place of purchase. Be sure to include detailed information about the problem. Pressure transducers
received by WIKA without a valid RMA number will not be accepted.
Process material certificate (Contamination declaration for returned goods)
Purge / clean dismounted instruments before returning them in order to protect our employees and the
environment from any hazard caused by adherent remaining media.
Service of instruments can only take place safely when a Product Return Form has been submitted and
fully filled-in. This Return Form contains information on all materials with which the instrument has come into
contact, either through installation, test purposes, or cleaning. You can find the Product Return Form on our
internet site (www.wika.de).

11. Storage, disposal

WARNING!
When storing or disposing of the transducer, take precautions with regard to remaining media in
removed transducers. We recommend cleaning the transducer properly and carefully. Remai-
ning media in the pressure port may be hazardous or toxic!
Storage
Mount the protection cap when storing the transducer.
Disposal
Dispose of instrument components and packaging materials in accordance with the respective
waste treatment and disposal regulations of the region or country to which the instrument is
supplied.
20 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio, WU-2X
GB