Lazer Helmet Lugano Manuel D'utilisation page 4

UK
Congratulations for buying our LAZER Lugano helmet!
ADVICES
WARNING
No helmet can protect the wearer against all possible
impacts.
For maximum protection, the helmet must fit firmly on
the head, and all retention straps must be securely
fastened. With the chinstrap comfortably but firmly
adjusted, it should not be possible, in most cases, for
the helmet to be removed from the head when pulled
at the rear in an upward direction.
The helmet is designed to be retained by a strap
under the chin.
The helmet may be used with glasses.
No attachments should be made to the helmet except
those recommended by the helmet manufacturer. Do
not drill or cut the shell.
The helmet is designed to absorb shock by partial
destruction of the shell and liner. This damage may
not be visible. Therefore if it subjected to a severe
blow, the helmet should be replaced even if it is
apparently undamaged.
The liner is essential to the intended performance of
the helmet.
The helmet may be damaged and rendered
ineffective by petroleum products, cleaning agents,
paints, adhesives, etc., without the damage being
visible to the user. Use only warm soapy water to clean
the helmet surface.
VISION
When riding a motorcycle, your life could depend on
a clear vision. Keep it unhindered by observing theses
basic rules:
• Use only genuine face shields
MEG Lugano bichro DEF.indd 6-7
• Tinted face shields are for daytime use only
• Always keep your face shield clean scratch free
• Always keep your field of vision unobstructed
FASTENING
Your helmet will be useless if it's too big or not properly
fastened. Always buy a helmet to your exact size and
always fasten it properly.
MODIFICATIONS
Never modify your helmet in any way. Modifications
could result in lowering the effectiveness of your
helmet.
DAMAGED HELMET
When your helmet sustains a severe shock, part of its
structure and lining may have been deteriorated by
absorbing the energy of the impact. These damages
may not be visible to the eye. In this case, do not
hesitate to replace it.
CARE AND MAINTENANCE
Clean the outside and inside of your helmet regularly.
Use a soft cloth and warm or slightly soapy water.
NEVER USE GAS OIL, SOLVENTS, PETROL OR OTHER
AGGRESSIVE PRODUCTS.
The padding is removable to make it easy to clean.
Again, only use warm or slightly soapy water. Hand
wash and drip dry.
To clean the visor (shield), dip it in lukewarm soapy
water. Wipe it in a lint free cloth from the top to the
bottom avoiding any circular motion.
After correctly cleaning the vents and the visor
mechanism, it is a good idea to lubricate them from
time to time with white or silicone grease to maximize
their durability.
STORAGE
After washing your helmet, store it inside a bag, in a
dry temperate place. Avoid storing your helmet for an
extended period in a place exposed to strong light.
- 6 -
DURABILITY
As time goes by, some wearing marks can appear
on safety elements of your helmet, such as: wearing
or fraying of the strap, malfunction of the buckle,
cracking or crumbling of the inner liner, cracking of
the shell,... In this case, contact your dealer to check
or replace your helmet.
PRACTICAL ASPECTS
• Micrometric buckle: ergonomic buckle providing
adjustable and precise harness
• Easy opening with thumb using an external central
button on the chinguard (fig. 1)
• Very compact volume even when chin guard is lifted
up; this provides an aerodynamic stability
• The attachment of the chin guard, with high strength
aluminium screws, ensures a maximum of safety
fastening
• The secure locking of the chin guard (closed) is
provided by metallic spurs and hooks
• In case of impact, the chin guard in the lifted
up position moves to the back of the helmet by
absorbing a part of energy
• Ventilation is optimized thanks to:
- a chin ventilation with 3 positions (fig. 2) that allow
you to choose the flow direction of the incoming
air: A. closed, B. defogging of screen, C. defogging
and helmet ventilation
- a top ventilation in 2 positions (Fig. 3 : D. closed,
E.strong ventilation)
- 4 rear extractors (Fig. 4)
• New screen ratchet system that can be quickly
removed
• Improved water-tightness by using a retractive
ratchet system
• Secured screen by using the integrated vent/race
lock at the bottom-centre of the screen
• Chin curtain is made of reflective material which
ensures frontal visibility when chin guard is lifted up
• Tubular visor's trim for a perfect sealing
THE COMFORT AND MORPHO SYSTEM PLUS
• 100% removable and washable. High comfort interior
with antibacterial fabric Silverplus
• Morpho System: cheek and head pads available
in several thickness for a perfect fitting to anyone's
morphology
• Ergonomic 3D cheek pads, entirely removable and
washable
• Snap buttons for the earpads
• Circular space created to fit most brands of
loudspeakers for Bluetooth sets
ADJUSTING AND USING
THE MICROMETRIC BUCKLE (fig. 5)
1. First, adjust the length of the strap by rolling it
through the plastic adjustable strap (A)
2. To close the buckle, insert the ratcheted tongue
(B) into the casing (C). When you hear a "click",
the buckle is closed. The multi-notching allows
for minute adjustments in order to obtain perfect
comfort and fit with the buckle
3. If necessary, go back and repeat Step 1
4. To open the buckle, pull on the red strap (D) and
draw back the ratcheted tongue using your other
hand
WILL IT STAY ON? (fig. 6)
You want to know the helmet you buy will stay firmly on
your head in a crash. Make sure the chinstrap is done
up and tilt your head forward. Ask someone to try and
roll the helmet off your head by carefully pushing up
from the rear of the helmet at its base. If you can roll
it off in the showroom, then it's sure to come off in a
crash.
- 7 -
26/10/16 16:55