Program Codes; Erase Codes - Siemens K44 Duo Manuel D'installation Et Utilisation

12 K44 Duo Installation & User manual

Program codes

1 Press B and enter the current password.
2 Enter A21.
3 Enter the desired code location using two
digits (01-30).
4 Enter the code for the current code location
(four digits for code location 01-20 or six digits
for code location 21-30).
Note! The four first digits in a 6-digit code
must not be the same as the digits in a 4-digit
code and the other way around.
5 Choose whether or not the code should be
disabled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
6 Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
7 Program the next code by continuing from
step 3 or press B to exit.
K44 Duo Installation & User manual

Erase codes

1 Press B and enter the current password.
2 Enter A22.
3 Enter the current code. If it is a 4-digit code,
enter A after the last digit.
If it is a 4-digit code, enter 0000. If it is a 6-dig-
it code, enter 000000.
4 Enter 0000 (000000) again.
5 Enter 0.
6 Enter 0 once again.
7 Erase the next code by continuing from step 3
or press B to exit.
13