Buzzer On/Off; Toggle Function On/Off; Duress Or Alert - Siemens K44 Duo Manuel D'installation Et Utilisation

16 K44 Duo Installation & User manual

Buzzer on/off

This is how to deactivate the buzzer if sound on
keypresses and door opening is not desired. Note
that the buzzer will keep sounding during pro-
gramming.
1 Press B and enter the current password.
2 Enter A65.
3 Enter 0.
To reactivate the buzzer, press 1 in step 3 instead.

Toggle function on/off

To be able to unlock a door permanently, the tog-
gle function has to be activated.
Proceed as follows:
1 Press B and enter the current password
2 Enter A81.
3 Enter 1.
4 Choose what relay outputs the toggle function
should apply to.
0 = both
1 = relay output 1
2 = relay output 2
To deactivate the toggle function, follow the above
steps, only enter 0 in step 3 instead.
In the Unlock the door permanently section you
will find instructions on how to unlock the door
permanently.
K44 Duo Installation & User manual

Duress or Alert

The K44 Duo allows for either using duress or
alert. The same command is used for different
function.
Duress
With the Duress function activated, a user can
enter a special code if he or she is forced to open
the door under threat. It is important to have a
plan for what action to take when a duress code
is entered.
NOTE! If Duress is activated, make sure you have
not programmed codes with consecutive
digits. Code 1234 must not exist with
codes 1235 and 1233. Code 5679 must
not exist with codes 5670 and 5678.
The Enter duress code section describes how a
user should enter the duress code.
Alert
When K44 Duo is delivered, the alarm output is
set to be activated if the door is open too long or if
the door is forced open.
Note that door contacts must be connected and
that Door monitoring must be activated for this to
work.
17