Klarstein SKAL Instructions D'utilisation Et Consignes De Sécurité page 41

Problem
Beer flows out too slowly
CO leaks quickly when
₂
inserting new cartridge.
Possible Cause
Inside CO pressure isn't
₂
high enough.
The connection tube or
the pouring tube has a
leakage.
CO pressure regulator is
₂
not in "-" position.
Connector seal broken.
Piercing pin broken.
Suggested Solution
Adjust the pressure knob
to release much CO
₂
pressure or replace a new
one.
Check whether the tube
has a leakage or not, if so
replace the tube.
Make sure CO pressure
₂
regulator is in "-" position.
Replace connector seal.
Replace piercing pin.
EN
41