Mounting The E.base Xt For The First Time; Using The E.base Xt - minnid e.base XT Mode D'emploi

E
N

Mounting the e.base XT for the first time

4
Ø Screw on the removable part.
Ø Screw on the fixed part.
Ø Screw the e.base XT centrally onto the
e.base. Check that the position is correct in
relation to the e.carry.
Ø Tighten all screws (20 Nm).
1.240.233BA_20200302
Ø Insert 2 x linchpins and attach.
5

Using the e.base XT

Ø Make sure that all screw connections
are tight, both linchpins are in the holes
and the spring clips are engaged.
19