Charging The Built-In Battery; Bluetooth - Boost BOOST6-PORT Manuel D'utilisation

Note : The ambient noise and interferences will also be recorded. That's why it is recommended to record in AUX
mode.
3. If the USB /SD card contains already recorded files, press the PLAY button to access to the folder that contains the
records. Per default the player plays the last record. If you wish to listen to another record, select it via the back/next
buttons.
4. Press the REPEAT button during you play a record to listen to it continuously.
USB/SD PORTS
• The unit plays MP3, WMA & WAV files.
Press the MODE button to toggle between AUX & USB/SD.
•
• Press the PLAY/PAUSE button to start or pause play.
Select the previous or next track via the buttons 11 & 15. Keep the buttons pressed for more than 2 seconds
•
to increase or reduce volume.
• Press REPEAT button to play one or all tracks.
Notes : The USB/SD/MMC files use the FAT32 system on the PC.
The files are played in sequence of theirs numbering.
We recommend to erase the files that you don't use anymore in order to increase speed and reduce errors.

CHARGING THE BUILT-IN BATTERY

The unit contains a built-in 12V battery. Plug the supplied 15Vdc/2A mains adaptor into the plug at the rear panel of
the unit. The indicator will light up. It takes about 4-8 hours to fully charge the battery. Once the battery is charged,
the orange indicator stops flashing or lights steadily in green. Unplug the pain adaptor as soon as the battery is fully
charged and switch the box off. DON'T OVERCHARGE THE BATTERY!
Charge the battery every two months if the unit has not been used.
•
• Charge the battery within 48 hours after the low battery indication.
During the charging process, the speaker makes a humming noise while the indicator is flashing. It means
•
that the power supply has started charging the battery.

BLUETOOTH

Press the MODE button on the remote control or on the box to select BLUETOOTH mode. The green led (24) flashes
quickly. Activate the Bluetooth function on your smartphone and start searching.
Select BOOST6-PORT in the list of found devices. If the pairing has been successful, the indicator lamp lights steadily
green after a few seconds. On some older models, it might be necessary to input the codes 1234 or 0000 to start
pairing.
The unit remembers the latest paired Bluetooth device. Next time you activate the Bluetooth function, the green
indicator will flash to search for the last paired unit. If the search is successful, the indicator light glows steadily. If the
box doesn't find the Bluetooth device after 5 seconds, it will search for another device and the indicator light will
flash.
Le indicator glows green if the pairing has been successful. Select a piece of music on your smartphone. You can use
the play/pause button on the box to play your music. In case of conflict between the built-in player of your
smartphone and the box, we recommend to use the controls on your smartphone and not the controls on the box.