Wireless Microphone - Boost BOOST6-PORT Manuel D'utilisation

FRONT & REAR OF THE BOX
This manual applies to several models. Therefore the functions might slightly change depending on your model.
1. MIC input
2. Echo control
3. Treble control
4. Bass control
5. Line input
6. 12Vdc/2A input
7. Main ON/OFF switch
8. Battery charge indicator
9. USB port
10. SD port
11. Previous track (USB/SD) or Volume - (long press)
12. Mode button (toggles between AUX & USB/SD)
13. Repeat one or all tracks
14. Number keys 0-9
15. Next track (USB/SD) or Volume + (long press)
16. Play/Pause
17. volume control
18 – 21. Vu-meter
22. Remote control receiver
23. Master volume control
24. Power & Bluetooth led (flashes in Bluetooth mode)
25. Digital display

WIRELESS MICROPHONE

1. Open the battery compartment and insert one AAA battery with the correct polarity.
2. Set the switch on the microphone to ON. If the power led doesn't flash or lights steadily, check the battery voltage
and their polarity.
3. Turn the mic volume control to the required level.
REC FUNCTION
1. In AUX mode, insert a USB stick or SD card and press the REC button. The display shows 0001 which means the
beginning of the record. You will hear the record in the speaker. If you use the USB stick/SD card for the first time
with this box, the system will set up a folder called VOICE. The files will be named REC001, REC002, etc. If you press
the Play/Pause key during the record, the record will stop. Press again to resume recording. Press the REC button
again to stop recording. The file will be saved automatically. Press the PLAY button to listen to your record.
2. In USB/SD mode press the REC button to switch into record mode. The current audio output stops and the display
shows « Recording ». The record starts when 0001 is displayed. You can now talk or sing into the microphone. Only
your voice will be recorded without any background music.