Primer LP-08 Manuel D'utilisation page 44

•
Speed: This enables the configuration in RPM of the different types of speed existing, in both the
wash and spin cycles. Each speed type has a minimum and maximum configuration value. (See table of
RPM/V equivalences by model).
•
Import/Export Configuration: It is possible to import a machine configuration from a USB memory
stick or to export the current machine configuration to a memory stick. When this button is pressed, an
intermediate window is displayed where we select whether to import or export (as in programmes).
•
Credit Mode: If the washing machine is in self-service mode, the password for Credit Mode (1234 by
default) can be configured. Make a note of the password in a safe place. If you lose it, please contact the
technical support service.
•
HUD: In self-service mode, it is also possible to configure the Main screen (first and second selection
and the
screens)
•
Beep: Option permitting the buzzer to be disabled. By default it is enabled.
•
RABC/Traceability: The information for each wash is registered, and the information saved (see
section 4.2).
•
Grace Period: When this button is pressed, an intermediate screen is displayed from where it is
possible to activate or deactivate the grace period and edit the value between 1 and 99 minutes (the
default setting is enabled and 1 minute).
•
Self-service statistics: This provides data about payments and the number of times each of the
favourite programmes is run. When the self-service statistics button is pressed, the following screen is
displayed.
Press "TOTAL" to display the total values for the machine. If a date is entered, the statistics are only shown
for this period. Press "Reset" to set all the values to 0, resetting the statistics.
40
Run screen. (See section 9.2.2).