Introduction; Interface; Selection Screen 1 - Buttons - Primer LP-08 Manuel D'utilisation

6 INTRODUCTION

This section lists the characteristics which are exclusive to self-service washing machines. The safety warnings
must be read and it is advisable to read the rest of the manual in order to fully understand how the machine
operates.

7 INTERFACE

7.1 Selection Screen 1 - Buttons

When the machine is switched on, Selection Screen 1 is displayed. There are 4 large fixed buttons on this
screen for selecting wash programmes.
1. Machine identifier: The label identifying the appliance based on the existing configuration is
displayed (if enabled).
2. Time: The current time is displayed in the format selected by the user.
3. Programme name: Name configured for the selected programme.
4. Programme length: Estimated length, in minutes, for the selected programme.
5. Programme temperature: Maximum temperature of the different cycles of the programme.
6. Price: Only in Coin mode, in CP and CR mode the price is not displayed and an LED is shown in its
place.
7. Number of programmes: The number of programmes displayed and the number of available
programmes are given. A maximum of 4 programmes are shown on screen, and the maximum
number of programmes to be shown is 16 (4 screens with 4 buttons).
8. Side browser arrows: If there are more than 4 programmes in favourites, the side browser arrows
are displayed. These allow you to move to the next selection screen.
9. Active button: Payment may be made in this first screen. When the cost of the programme has been
reached, the price disappears and the colour of the button changes, indicating that the programme is
ready to be run.
Press a programme button to go to "Selection Screen 2 – Payment".
On completion of a programme, the machine returns directly to this screen.
In addition, even if the screen has been touched, or money has been inserted, if there is no activity within 15
minutes, the machine returns to this screen, resetting the amount which might have been inserted.
35