Maintenance And Cleaning; Technical Data - Conrad 75 17 12 Mode D'emploi

Maintenance and cleaning

Before cleaning the outside of the surveillance camera's casing, unplug it from the mains.
To clean the outside of the camera, it is sufficient to use a dry, soft, clean cloth. In case of marked
pollution the cloth can be moistened slightly.
Clean the lens very carefully, otherwise you may scratch it. Do not use any aggressive cleaning
agents.
Disposal
Electrical and electronic products do not belong in the household waste!
Please dispose of the device, when it is no longer of use, according to the
current statutory requirements.

Technical Data

a) 8.5 mm CCD B/W camera, 420 TVL, 3.6 mm, IR order no.: 751712
Image sensor:
Operating voltage:
Current consumption:
Recommended power transformer:
TV lines horizontally:
Detection area, horizontal:
Detection area, vertical:
Camera lens:
Light sensitivity:
IR-LEDs:
IR LED range:
Protection type:
Operating temperature:
Dimensions (Ø x D):
Weight:
b) 6.35 mm CCD B/W camera, 420 TVL, 3.6mm, IR order no.: 751711
Image sensor:
Operating voltage:
Current consumption:
Recommended power transformer:
TV lines horizontal:
Detection area, horizontal:
Detection area, vertical:
Camera lens:
Light sensitivity:
IR-LEDs:
IR LED range:
Protection type:
Operating temperature:
Dimensions (Ø x D):
Weight:
8.5mm (1/3") CCD
12 V/DC
max. 200 mA (with activated IR LEDs)
12 V/DC, 300 mA
Plug polarity (inside=plus, outside=minus)
420
90°
70°
3.6 mm
0 LUX
12
up to 10 metres
IP 65
-10°C to +50°C
approx. 74 x 50mm
approx. 157 grams (excl. mounting base)
6.35 mm (1/4") CCD
12 V/DC
max. 200 mA (with activated IR LEDs)
12 V/DC, 300 mA
Plug polarity (inside=plus, outside=minus)
420
90°
70°
3.6 mm
IR LEDs are activated between 4 - 8 LUX
12
up to 10 metres
IP 65
-10°C to +50°C
approx. 74 x 50mm
approx. 166 grams (excl. mounting base)
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2009 by Conrad Electronic SE.