Jusb3~4: Usb 3.1 Gen1 Connectors - MSI X370 GAMING M7 ACK Présentation Rapide

JUSB3~4: USB 3.1 Gen1 Connectors

These connectors allow you to connect USB 3.1 Gen1 ports on the front panel.
Important
Note that the Power and
Ground pins must be
connected correctly to avoid
possible damage.
Charger Port
The JUSB4 connector is a charger port which can increase USB power output for fast
charging your smartphone or USB-powered devices. The Charger Port is hardware
controlled by motherboard chip, it can still charge your device in suspend, hibernate
state or even shutdown states. However, when you boot the computer into Windows
you will need to install the MSI
Charging mode.
Watch the video to learn how to charge the smartphone with Super-
Charge.
http://youtu.be/FCyvjr5NbOw
Important
When the Charging mode is enabled, the Charger Port data syncing will be disabled.
1
20
1
2
3
4
5
6
7
8
9
10
SUPER CHARGER application to turn ON/OFF the
®
Video Demonstration
10
11
JUSB3
Power 11
USB3_RX_DN 12
USB3_RX_DP 13
Ground 14
USB3_TX_C_DN 15
USB3_TX_C_DP 16
Ground 17
USB2.0- 18
USB2.0+ 19
NC 20
10 11
JUSB4
1 20
USB2.0+
USB2.0-
Ground
USB3_TX_C_DP
USB3_TX_C_DN
Ground
USB3_RX_DP
USB3_RX_DN
Power
No Pin
Overview of Components
,
®
25