Glatz Alu-Top Mode D'emploi page 5

1. a) a) b)
2. a) b) b)
c) d) 1. Sunshade installation and opening
a) Put the pole sections together, one on top of the other, and secure
them by means of the fastening screw in the profi le channel.
b) Screw the canopy onto the pole's top end.
2. Closing
a) Loosen the locking knob and slide it upwards until il reaches the
stop position.
b) Pull the covering fabric out from the rods, arrange it carefully all
around and secure it by means of the binding belt or sewed on cord.
c) Find the ideal place for the anchorage system. Pay attention to the
correct dimensioning. Put the pole into the support tube and fi x it
by means of the fastening screw.
d) Slide the locking knob downwards until it reaches the stop position,
tighten it fi rmly and make sure that the covering fabric is well
tensioned.
GB