Soba XC510 Mode D'emploi page 6

XC510 AIR CONDITIONER/DEHUMIDIFIER INSTRUCTIONS
OPERATING AND FUNCTIONS
Plug the air conditioner into a 230V/50Hz and at least 10 amp socket.
The compressor is an essential element in the production of cold air. The appliance is
fitted with an overheating feature that delays start up by three minutes.
To protect the compressor from overheating or freezing, the compressor will only
operate when the room temperature is between 61°-90° F or 16°-32° C.
Sensor button and LED lamp functions
ON/OFF Button: Press to turn the unit on or off.
Temperature up button: Press to raise the thermostat temperature setting (only
in COOL mode).
Temperature down button: Press to lower the thermostat temperature setting
(only in COOL mode).
SPEED button: Press to select either low (LO) or high (HI) fan speed.
MODE button: Press to select either "AUTO", "COOL", DRY" or "FAN" mode. Select
AUTO mode to activate the pre-set thermostat settings (see no. 11). Select COOL to
set the thermostat to your preferred temperature.
TIMER button: Press until the desired time (1 to 12 hours) appears on the LED
display. The timer can be used to switch the unit either ON or OFF when the set time
expires.
TIMER ON: Sets the timer so the unit will turn on later. Press the TIMER button
when the unit is off. Hold the TIMER button down until the desired number of hours
is displayed. The unit will turn on when the set time is reached.
TIMER OFF: Sets the timer so the unit will turn off later. Press the TIMER button
when the unit is on. Hold the TIMER button down until the desired number of hours
is reached. The unit will shut off when the set time is reached.
NOTE: The Sleep function is programmed to lower the temperature only in the first
two hours. Then the thermostat temperature, and with it the room temperature,
rises automatically by 1° C every hour. The unit will shut off when the set time is
reached.
6