Brinno PHV MAC Mode D'emploi page 7

Initial Setup- Install batteries
1. Open battery cover
2. Install 4AA batteries.
Initial Setup- Set Date & Time
1. Press the Power button for 1 second to go to the preview screen.
2. At the preview screen, hold the Up
button for 3 seconds, the menu setting
screen will appear.
3. On the Main Menu setting screen, use
the Down button to go to the Set Date &
Time option.
4. Press Power button to select the Time & Date menu.
5. Choose the Set option, using the Up button.
6. Press Power button to select the Set option.
7. Set the date and time
Using the Up and Down buttons . As
the date flashes, press the Up button
to get a higher number, and press the
Down button to get a lower number.
Press Power button to go to the next
field.
When finished, press the Power but-
ton to exit.
2
3
Menu Setting
Motion Activated Screen
File Format
Band Filter
Set Date&Time
Reset
EXIT V X.XX.X
7
Date & Time
2013/05/01
17:30
: OK to next
: 2012/ 05 /01
: 2014/ 05 /01
: 2013/ 05 /01
Next
PHV MAC- EN
3 sec
07