Using The Chopping Blade - Euro-Pro Ninja BL490EU Mode D'emploi

Chopping blade
H
USE
If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.
CAUTION: CHOPPING BLADE IS
NOT LOCKED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLEND AND PREP BOWL.
USING THE

USING THE CHOPPING BLADE:

CHOPPING BLADE
CAUTION: USE CAUTION WHEN HANDLING
THE CHOPPING BLADE AS THE BLADES ARE
& DOUGH BLADE
VERY SHARP.
1 Holding the Chopping Blade assembly by the top of
the shaft (H), place it onto the gear shaft inside the
bowl. Ensure that the attachment fits around the
gear shaft and that it is standing straight.
2 Add the ingredients and secure the bowl lid onto
the bowl.
3
Plug the power cord into the electrical outlet. Once
the bowl is engaged, the programs available for
that attachment will illuminate. Select the program
desired based on your recipe. The Auto-iQ
program will stop the appliance automatically at
the end of the program.
2 8
®
I J
REMOVAL
CAUTION: THE CHOPPING BLADE
IS NOT LOCKED IN PLACE.
IF POURING WITH THE LID
REMOVED, ALWAYS REMOVE THE
CHOPPING BLADE FIRST.
4 When you have reached your desired consistency,
stop the appliance by pressing the START/STOP
button or selecting the program twice. Wait for
the blade to stop turning.
REMOVAL:
5 To remove the lid, press the release button (I) on
the lid and pull the lid handle up to a 90° angle.
6 Turn the bowl anticlockwise and lift it to remove
it from the motor base (J).
7 Make sure that the motor base is unplugged
when not in use.
® 8 To release the motor base from the counter or
tabletop, place your fingers under the sides of the
black paddles on the sides of the base and lift up
to release suction cup feet (K).
w w w . n i n j a k i t c h e n . e u
Dough blade
K
USING THE DOUGH BLADE:
IMPORTANT:
Do not overfill or exceed. Motor may overheat.
1
Holding the Dough Blade assembly by the top of
the shaft (L), place it onto the gear shaft inside
the bowl. Ensure that the attachment fits around
the gear shaft and that it is standing straight.
2 Add the ingredients and secure the bowl lid onto
the bowl.
3 Plug the power cord into the electrical outlet.
Press the START/STOP button to turn on the
unit. Once the bowl is engaged, the programs
available for that attachment will illuminate.
Select LOW on the control panel and process
until ingredients come together to form a mass.
4
Once finished making the dough, stop the appliance by
pressing the START/STOP button again or selecting
the program twice. Wait for the blade to stop turning.
L
USE
IMPORTANT: DO NOT OVERFILL.
TO AVOID SPILLING, DO NOT
ADD INGREDIENTS PAST THE
"MAX" FILL LINE.
This makes 500g of dough at a time.