Euro-Pro Ninja BL490EU Mode D'emploi page 26

A B
ASSEMBLY
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
CAUTION: DO NOT BLEND HOT LIQUIDS. ALLOW THE LIQUIDS OR FOODS TO COOL TO ROOM TEMPERATURE BEFORE BLENDING.
IMPORTANT: DO NOT OVERFILL. TO AVOID SPILLING, DO NOT ADD INGREDIENTS PAST THE "MAX" FILL LINE.
ASSEMBLY & BEFORE FIRST USE:
USE OF THE
•
Remove all packaging material and labels from
the appliance.
NUTRI NINJA
®
• Wash the lids, cups, blades, and processor bowl
CUP
in warm, soapy water with a soft cloth.
• Rinse and dry thoroughly.
NOTE: Ninja Auto-iQ
® ®
Technology can sense
• Lids, cups, blades, and processor bowl are
which container is on the
all dishwasher safe. It is recommended that
motor base. The function
the lids and attachments be placed on the top
lights will illuminate
rack. Ensure that the Pro Extractor Blades
depending on which Nutri
are removed from the cups before placing in
Ninja Cup is placed on the
the dishwasher.
motor base.
• Wipe the motor base clean with a damp cloth.
ASSEMBLY:
WARNING: NEVER LEAVE THE APPLIANCE
UNATTENDED WHILE IN USE.
CAUTION: USE CAUTION WHEN HANDLING THE
BLADE ASSEMBLY AS IT IS VERY SHARP.
IMPORTANT: MAKE SURE THE MOTOR BASE
IS PLUGGED IN FOR USE.
2 6
®
C
USE
1 Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press down
on the motor base to make sure the suction cups
adhere to the counter or tabletop.
2
Add ingredients to the Nutri Ninja cup.
3 Place the Pro Extractor Blades onto the cup and
tightly screw on clockwise (A) until you have a
good seal.
4 Turn the Nutri Ninja cup upside down and place it
™
onto the motor base (B), aligning the tabs on the
cup with the motor base. Rotate the Nutri Ninja
cup clockwise until it locks in place (you will hear
a click when the lock is engaged).
USE:
5 Once the cup is engaged, the programs available
for that attachment will illuminate. Select
the program (C) desired based on your recipe.
The Auto-iQ program will stop the appliance
automatically at the end of the program.
6 To pause the program, press the selected speed
or Auto-iQ Program a second time.
w w w . n i n j a k i t c h e n . e u
D E
REMOVAL
REMOVAL:
7 Once you have reached your desired consistency,
press the Power button to turn the program off.
Turn the Nutri Ninja cup anticlockwise (D) and
pull straight up to remove (E).
8 Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades
anticlockwise.
9 Place the Sip & Seal
cup, twist to seal, and enjoy!
10 Make sure the appliance is unplugged when not
in use.
11 To release the motor base from the counter or
tabletop, place your fingers under the sides of the
black paddles on the sides of the base and lift up
to release suction cup feet (F).
F
lid onto the Nutri Ninja
®