PALSON Titanium-Pro Mode D'emploi page 11

CLEANING
1. Unplug the hair straightener and let it cool down. The plates must only be cleaned when they are
cold.
2. Use a soft, slightly damp cloth, to clean the surface of the hair straightener. Do not let water or any other
liquid enter through any opening in the hair straightener.
3. If there is an accumulation of material on the plates, clean them with a mild, non-abrasive soap or use
a liquid cleaner specifically designed for the purpose with a soft cloth.
STORAGE
1. Unplug the appliance, let it cool down and store it in a cool, dry place.
2. Store the cable rolled up, without squashing it.
3. Never roll the cable around the appliance as this can cause premature wear and may break the cable.
4. Do not put any tension on the cable where it enters the appliance as this can cause wear and possible
breakage of the cable.
5. Never hang up the appliance by its power cable.
Thank you for putting your trust in one of our products.
11