Multi-Channel Television Sound 47 - Philips MX5100VR Manuel Du Propriétaire

MX5100VR.qxd 6/04/2004
Your System can play tapes recorded in Hi-Fi (high fidelity) stereo,
which produces a crisp, clear sound from the left and right audio
channels.Your System also can play tapes recorded in a second audio
(usually, that means your program is recorded in a second language).
Of course, your System will play tapes recorded in monaural (single-
source) sound as well.
Your System also will record a video cassette in Hi-Fi stereo or in
second audio, so when you play that tape on the System, it will be in
stereo or second audio.
Read the directions on this page to familiarize yourself with the
stereo and second audio setups. Follow the directions below to
record in stereo or second audio. Follow the directions on page 48
to play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the System, portions of the
display shown below will appear when you press DISPLAY twice.
STOP 12:00 AM
STEREO
SLP
To set the System to receive programs in stereo or second audio,
follow these steps.
1
Press VCR, then press DISC/MENU.
- M E N U -
TIMER PROGRAMMING
B
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
2
Press o or p to select TV STEREO or SAP (Second
Audio Program). Press B so ON appears beside your
selection.
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
B TV STEREO
SAP
3
Press DISC/MENU to remove the menu.
3:37 PM Page 47

Multi-Channel Television Sound 47

If SAP or STEREO appears, the program is available
CH 02
in second audio or stereo. Even though a program is
available in second audio or stereo, you must program
SAP
the System to receive or record the program.
Follow the directions below.
This display is not available during tape play.
[OFF]
[ON]
[OFF]
[ON]
STANDBY-ON
TIMER SET
SETUP/ AUDIO/
SUBTITLE ANGLE
PROG BAND
REC DISPLAY ZOOM
C-RESET
SKIP/ SKIP/
CLEAR
CH
TITLE MODE/SPEED RETURN
TUNER
3
DVD VCR
DISC
OK
MENU
STOP PLAY
REW FF
PAUSE
Helpful Hints
• You can only receive and record in
stereo or second audio programs
that are broadcast in stereo or
second audio.You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. The display shows you if the
program is in stereo or second
audio.
• If SAP is ON but the program is
not broadcast in Second Audio, you
will hear and record the program
in normal audio.
CH
1
2