Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type.
NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about the installation of the plug please
contact a qualified electrician.
If a 13A 3-pin plug is fitted, it must be an ASTA approved plug, conforming to BS1363 standard.
Replacement fuses must be rated at 3A and be BSI or ASTA BS1362 approved.
The wires in the mains lead are coloured as such:
BROWN
BLUE
Please note that the colour of these mains wires may not correspond with the colour markings that
identify the terminals in your plug. Please proceed as follows:
The BROWN coloured wire must be connected to the terminal, which is marked with the letter "L" or is coloured RED.
The BLUE coloured wire must be connected to the terminal, which is marked with the letter "N" or is coloured BLACK.
CAUTION: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL IN THE PLUG WHICH IS MARKED E OR
WITH THE EARTH SYMBOL ( ) OR COLOURED GREEN OR GREEN AND YELLOW.
This symbol indicates that this unit is a Class II appliance and therefore an earth connection is not required.
FITTING OF A PLUG - UK AND IRELAND ONLY
-
-
LIVE
NEUTRAL
Publicité
Table des Matières
