Geemarc CL7160 Loop Mode D'emploi page 9

POSITIONING
POSITIONING
The infra-red(IR) signals need a direct line-of-sight
connection between the transmitter and the headset.
Position the transmitter such that there is a direct line-of-
sight connection with the headset when in use. The IR
signals may be blocked by objects such as walls, doors,
furniture, newspapers, books, etc. The IR diodes are lit
during use.
NOTE: When there is no audio input to the
transmitter/charge, transmission is turned off
automatically and the blue LED goes off. This is
resumed automatically when audio signal is restored.
8