Control Panel - ETNA AFI8529ZT Notice D'utilisation

Control panel

1 On/Off button
2 Programme selection buttons
3 Delay start button
4 Indicator lights
5 Function buttons
Salt
Rinse aid
End
Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the On/Off button. If ALL programme
button lights come on, the appliance is in
setting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
Indicator lights
Comes on when the special salt has run out.
Comes on when the rinse aid has run out.
Comes on when a washing programme has
ended. It also has added functions of visual sig-
nalling as:
– the setting of the water softener,
– activation/deactivation of the audible signals,
– intervention of an alarm due to the malfunction
of the machine.
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button. If a programme but-
ton light comes on, the last performed or se-
lected programme is still set. In this case, to
return to setting mode, the programme has
to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until all the programme
button lights come on. The programme has
been cancelled and the machine is now in
setting mode.
63