Safety Rules - Tecno-gaz IGEN - HAND Notice D'emploi

Unpacking
 Free the appliance from ist packing being
careful not to damage it
Installation
WARNING:
When choosing the place where to install the
appliance, keep in mind its overall dimensions
and the passageways. The appliance must be
installed in a dry and safe place.
CAUTION:
When choosing the place where to install the
appliance, all norms in force for the prevention
of accidents must be observed.
Environmental working conditions

Relative humidity 30% ÷ 95%
 o
Temperature + 5
CAUTION:
Using the appliance in a potentially explosive
environment is prohibited.
After choosing a suitable place to install the
appliance, proceed as follows:
 Bring your hands for a moment near the
sterilization area and check that the correct
working of the appliance.
WARNING:
To avoid any use from unauthorised personnel,
we suggest to disconnect it.
WARNING:
In case of having to replace the battery, contact
expert people or in any case mount a battery
complying with the rules in force.
Manuale d'uso, Operating manual, Notice d'emploi, Manual de uso, Betriebsanleitung
o
C- + 40 C

SAFETY RULES

IGEN-HAND is a very simple appliance which
needs no particular safety prescription for using
it. In any case, we suggest not to start the
appliance without reading and understanding
all the recommendations of danger, caution and
warning contained in this manual.
To operate correctly with this appliance, you do
not need to be a skilled operator, however, it is
indispensable:
 To read and understand what is therein
described.

To know the capacities and features of this
appliance.

To make sure that the appliance has been
installed in compliance with the existing laws
and regulations on the matter.
 To make sure that all users have been
suitably instructed and that they can use the
appliance in a correct and safe way.

To keep this maintenance and operating
manual always available in an easily
accessible place and not to hesitate to
consult it whenever this is necessary.
CAUTION:
Avoid removing or making unreadable the labels
of Warning, Caution or Instruction. Replace labels
that are unreadable or missing. If one or more
labels are missing or damaged, please note that
it is possible to get them from the reseller nearest
to you or from the manufacturer.
 When using and maintaining the appliance,
follow the unified regulations for the
prevention of accidents.
 Unauthorized variations or modifications to
the appliance, free the manufacturer from
all responsibility for any damage or accident
derived. In particular, please note that the
alteration or removal of safety devices
represent a violation to the regulations for
the prevention of accidents at work.
8