Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
The Pull function
· If the frame is folded in and the frame
lock is activated, then the frame can be
pulled by the pushbar.
Change the height of the pushbar (g)
· The pushbar height can be adjusted to
4 positions.
· Push the height adjustment button on
the pushbar.
· By pushing the pushbar up or down
and releasing the button, you can feel
the other positions.
The restaurant position
· This is the lowest possible position for
the pushbar. This position can be used
for improving compactness when the
frame is used in the unfolded position
in a restaurant, for example.
The swivel system (4Rider)
The swivel position (h)
· Move the front handle (under the foot
rest) to the right. The front wheels will
now swivel.
· For blocking the steering system: move
the front handle to the left. The swivel
position automatically locks when the
front wheels are moved back into their
original, straight position.
The break (i)
· Gently push down the back of the brake
pedal positioned on the rear frame with
your foot to block the brake.
· Gently push down the front of the brake
pedal positioned on the rear frame to
unblock the brake.
The carry cot (0-6 months)
· The carry cot is used to transport your
baby (0-6 months) lying down. You can
remove the carry cot and leave your
child lying in it in other places.
Assembly (j)
· Place the carry cot with the fastening
parts above the universal fixation
points of the frame. Push the carry cot
down until it firmly clicks. Make sure
that the carry cot is placed horizontally
and that the red surfaces in the uni-
versal fixation points are fully covered.
18
Folding the chassis with the carry cot
attached (q)
· It is possible to fold the frame while the
carry cot is attached. First unlock the
carry cot from the folding mechanism
by pulling the two ring shaped hooks
under the carry cot. Now the carry cot
can be tipped forward and the frame
can be folded in the usual way.
Removing the carry cot from the frame
· Push the two release buttons of the uni-
versal fixation points in forward direction
until the carry cot is released. You can
now remove the carry cot from the frame.
· In order to carry the carry cot, the carry-
ing straps should be fixed into the plas-
tic buckles. To stow away the carrying
straps, use the pocket at the foot of the
carry cot.
· The carry cot can be folded compactly
by first removing the liner and then
pushing the three metal U-shaped wires
forward until the carry cot collapses.
! regularly check the bottom and the car-
rying straps of the carry cot on wear.
The canopy (j)
· Place the canopy in the openings in the
plastic (L+R) until it locks.
· To remove the canopy, press on the small
press buttons on the canopy parts and
pull the canopy out of the notches.
The apron
· To assemble the apron, fix the press-
buttons on the indicated positions.
· To remove the apron, loosen the press-
buttons.
The Deluxe Joey carry cot
· The carry cot is used to transport your
baby (0-6 months) lying down. You can
remove the carry cot and leave your
child lying in it in other places.
Assembly (k)
· Place the carry cot with the fastening
parts above the universal fixation points
of the frame. Push the carry cot down
until it firmly clicks. Make sure that the
carry cot is placed horizontally and that
the red surfaces in the universal fixa-
tion points are fully covered.
Publicité
Table des Matières
