Installation; First Start - Ksenia ergo-T pro Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION

Fix the mount adapter plate of ergo-T pro directly to the wall, using two 5mm
expansion anchors and distance between holes at 83.50mm or 60mm, or on a DIN 503
recessed box or on a European standard box (60mm screw-distance).
Connect the keypad to the panel as described in previous paragraph "Lan network
connections and power wiring".
EN
Insert the support hooks on the metal plate in the support holes on the back of the
keypad and slid it downwards to lock the device.
Finally, lock the bottom of the ergo-T pro using the screw supplied with the mount
adapter plate, paying attention to let the connection cables (power supply and LAN
network) exit from the bottom of the keypad.
support hooks
mount adapter plate
locking screw

FIRST START

Remove the protective transparent film placed on the touchscreen.
To switch on the device, press the <ON/OFF> button for five seconds (see paragraph
"Product description"). Once the startup phase has finished, App lares 4.0 for ergo-T
pro starts.
At this point, from "Installer" configuration program, open the menu <IP Devices ->
ergo-T> and add the keypad ergo-T where, if properly powered and connected to the
panel, the keypad will appear as shown in the following image, the acquisition is
immediate, you have to save and apply the configuration session (MAC Address will be
read and displayed automatically).
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ksi2100042.302

Table des Matières