König Electronic CS500PLC4N100 Mode D'emploi page 5

2.2 Adding HomePlug C to an existing Network AB (Network ABC)
The procedure is as followes:
1. Press and hold the security button on HomePlug C for about 10 seconds. Release when the power
light flashes. The password to HomePlug C has just been erased. It must be linked to your network
to adopt the new network security key.
2. Press and hold the security button on HomePlug C for 2 seconds. The power light starts to flash.
3. Within 120 seconds, press and hold the security button on HomePlug C for 2 seconds and then
release.
4. HomePlug A, HomePlug B and HomePlug C are now networked.
2.3 Removing HomePlug B from HomePlug A and C network and join HomePlug D and E
(Network BDE)
The procedure is as followes:
1. Press and hold the security button on HomePlug B for about 10 seconds. Release when the power
light flashes. The password to HomePlug B has just been erased and HomePlug B removes itself
from HomePlug A and C.
2. Press and hold the security button on HomePlug D for 2 seconds. The power light starts to flash.
5